Medium Micro Cement

Bicomponent Micro Cement

Definition:




High-performance hydraulic micro mortar made from calcium cements and marble sands of different grain sizes, as well as other additives. Mixing all materials gives the cement magnificent physical and chemical properties and aesthetic appeal. For indoor and outdoor locations. Used for creating highly decorative continuous cladding with a cement-mineral type appearance; on floors, walls, bath tubs, sinks.



Packaging: Component A (17 kg powder) - Component B (4.65 kg liquid).



Instructions for mixing:


  • 1) Pour the liquid - Component B – content of bottle into container, adding dye/toner here if preferred (more convenient when homogenised) or after mixing.
  • 2) Next gradually add the powder - Component A - mixing with electric mixer (high rpm if possible), homogenise product well to eliminate lumps.


  • Life of mixture: from 5 to 6 hours in container.

    Cleaning tools: use water.

    Temperature of application: 7 °C minimum - 32 °C maximum (both air and surface).

    To obtain colours: all 24 colours in the chart have been obtained with the formula on the lower part of the colour blocks. All dyes/toners can be mixed together to make other colours. To colour this material, when using outdoors only use dyes/toners classified as for outdoor use on this chart.

    Possible protection: matt or glossy single-component polyurethane varnish applied over penetrating acrylic primer. Matt or glossy two-component polyurethane varnish.



    *This information is a summary only and the corresponding technical specifications apply.

    Technical Documentation

    Photo Gallery

    Medium Microcement

    Terms & Conditions

    C/ Basaldea nº 27, Vitoria-Gasteiz Teléfono: 945 26 46 77 | 945 29 09 24