Sand Effect

Definition:




Coating for mural decoration with matt mineral appearance, non-aggressive feel, which can also have a metallic or pearlescent appearance.



Supports: must be clean, dry, compact and free of any kind of pollution that could impede adherence. As well as preparation with Opaque Base Primer, Specific Primer: Opaque Base, apply 2 or 3 coats diluted with water (5 to 7%) if required, for easier application.

Tools for application: Spalter-brush.

Clean tools in: water.

Colours: obtained by mixing the Tints/Toners (according to the proportion marked in this colour chart) with the Sand Effect Matt Base. Stir thoroughly to mix the material.

Metallic/pearlescent colours: obtained by mixing the Tints/Toners Gold, Pearl Grey, Aluminium Grey and Bronze, (in the proportion marked in this colour chart) with the Sand Effect Gloss Base.

Bases: Mate (normal effect) and Gloss (for metallic effects).

Packaging: Mate Base 4 l. and 0.75 l. Gloss Base 3 l. and 0.75 l.



Material Square metres Number of Coats
0.75 l. 6 - 8 1




Complete drying time: 24 - 36 hours at 20 °C and 55% of relative humidity.
Precautions: none.

Pot life: 16 months from date of manufacture, in stable environmental conditions +5 °C min. and +32 °C max. without opening the container. Protect from freezing and high temperatures.

* For further information, consult technical specifications. This information is merely a summary and does not replace these specifications.

Technical Documentation

Photo Gallery

Sand Effect

Terms & Conditions

C/ Basaldea nº 27, Vitoria-Gasteiz Teléfono: 945 26 46 77 | 945 29 09 24