High performance two-component hydraulic micromortar based on calcium cements and impalpable marble loads in addition to other additives which, when mixed with the previous ones, provide it with superb physical-chemical properties as well as aesthetic properties.
It is used on Medium Microcement to provide it with a more polished or fine finish if desired than when only Medium Microcement is used.
It is also applied to simulate marble or other very smooth textured materials.
Due to its lower resistance to compression, the Fine Microcement finish will only be used on walls and floors with moderate human traffic.
Packaging: Component A (14kg powdered)-Component B (5l liquid = 5.6 kg)
Component A (3kg powdered)-Component B (1l liquid = 1.1 kg)
pH: 11.5±0.5
Life span of the mix: 5½-6 hours in the tin, under 20°C temperature and 55% relative humidity conditions.
Application tools: Stainless steel trowels and spatulas.
Cleaning of tools: Clean with soap and water immediately after use.
Dilution of product: If it is necessary, you add water, see the data sheet.
Colours: are obtained by mixing the Dyes/Toners (according to the proportion indicated in their color chart) with the mixture (A+B)
